Strong high pressure circulation pump with magnetic drive and seal-free design, equipped with a brushless 24V DC motor (nominal voltage 27.2V). Suitable for hoses with a 25mm connection, it achieves a maximum flow rate of up to 75 liters per minute.

Perfect for circulating water and antifreeze in heating systems of trains, buses, boats and similar applications, as well as for circulating fresh water or coolant in vehicles.

Performance: The CM95HP pump offers high flow at high pressure and is ideal for demanding applications such as cooling electrical circuits and batteries in hybrid and fully electric buses, trains and other commercial vehicles

Flow rate: 75 liters per minute at 0.6 bar; 37 liters per minute at 1 bar.
Design: Robust, magnetically driven pump without seals (leak-proof)
Protection class: Water and dust protected (IP6K9K, IP67) with a 24V DC motor (nominal voltage 27.2V) for continuous operation

Safety: Thermal overload protection through throttle function with automatic speed control in the event of overheating; tachometer output signal
Service life: Permanently lubricated, ball-bearing brushless motor for an operating time of up to 40,000 hours

Features: Not self-priming, requires flooded suction
Dry-run protection: Can run dry for up to 20 minutes
Suitable liquids: Fresh water or water-glycol mixture with a maximum of 60% glycol content; Temperature range: -40°C to +100°C
Ambient temperature: -40°C to +85°C
System pressure: -0.2 to +2.5 bar at 100°C
Mounting: Universal bracket for flat surfaces included in delivery
Connection: Suitable for hoses with an inner diameter of Ø38 mm (1-1/2")
Power consumption: 16.4A; fuse 25-30A
Dimensions: Height 16.2 cm, width 13.5 cm, length 20.8 cm; weight: 3.2 kg

Net price: € 945.80

Weight: 4,2 kg
Delivery time 2 - 5 working days after receipt of payment

Strong high pressure circulation pump with magnetic drive and seal-free design, equipped with a brushless 24V DC motor (nominal voltage 27.2V). Suitable for hoses with a 38mm connection, it achieves a maximum flow rate of up to 78 liters per minute.

Perfect for circulating water and antifreeze in heating systems of trains, buses, boats and similar applications, as well as for circulating fresh water or coolant in vehicles.

Performance: The CM95HP pump offers high flow at high pressure and is ideal for demanding applications such as cooling electrical circuits and batteries in hybrid and fully electric buses, trains and other commercial vehicles

Flow rate: 78 liters per minute at 0.6 bar; 43 liters per minute at 1 bar.
Design: Robust, magnetically driven pump without seals (leak-proof)
Protection class: Water and dust protected (IP6K9K, IP67) with a 24V DC motor (nominal voltage 27.2V) for continuous operation

Safety: Thermal overload protection through throttle function with automatic speed control in the event of overheating; tachometer output signal
Service life: Permanently lubricated, ball-bearing brushless motor for an operating time of up to 40,000 hours

Features: Not self-priming, requires flooded suction
Dry-run protection: Can run dry for up to 20 minutes
Suitable liquids: Fresh water or water-glycol mixture with a maximum of 60% glycol content; Temperature range: -40°C to +100°C
Ambient temperature: -40°C to +85°C
System pressure: -0.2 to +2.5 bar at 100°C
Mounting: Universal bracket for flat surfaces included in delivery
Connection: Suitable for hoses with an inner diameter of Ø38 mm (1-1/2")
Power consumption: 16.4A; fuse 25-30A
Dimensions: Height 16.2 cm, width 13.5 cm, length 20.8 cm; weight: 3.2 kg

Net price: € 780,25

Weight: 4,2 kg
Delivery time 2 - 5 working days after receipt of payment

Circulation pump with 24V DC brush motor (nominal voltage 27.2V), equipped with a 38mm hose connection and a maximum flow rate of up to 100 liters per minute.

Ideal for circulating water and antifreeze in heating systems of cars, boats, mobile homes and similar applications, as well as for circulating fresh water in vehicles.

Flow rate: 100 liters per minute at 0.1 bar; 67 liters per minute at 0.25 bar
Shaft seal: mechanical seal
Protection class: Water and dust protected (IP67) with a 24V DC motor (nominal voltage 27.2V) for continuous operation

Service life: The permanently lubricated, ball-bearing brush motor is designed for approx. 3,000 hours of operation

Features: Not self-priming, requires flooded suction; the pump is not suitable for dry running

Suitable liquids: fresh water or water-glycol mixture with up to 60% glycol content; temperature range: -30°C to +100°C

Ambient temperature: -30°C to +70°C

Maximum system pressure: 2.0 bar

Attachment: bracket for flat surfaces included in delivery

Connection: for hoses with an inner diameter of Ø38 mm (1-1/2")

Power consumption: 4.4A; fuse 6A

Dimensions: height 11.0 cm (from base plate, total 11.6 cm), width 11.7 cm, length 21.1 cm; weight: 1.75 kg

Net price: €231.51

Weight: 2,3 kg
Delivery time 2 - 5 working days after receipt of payment

Circulation pump with 24V DC brush motor (nominal voltage 27.2V), equipped with a 38mm hose connection and a maximum flow rate of up to 115 liters per minute.

Ideal for circulating water and antifreeze in heating systems of cars, boats, mobile homes and similar applications, as well as for circulating fresh water in vehicles.

Flow rate: 115 liters per minute at 0.1 bar; 85 liters per minute at 0.25 bar
Shaft seal: mechanical seal
Protection class: Water and dust protected (IP67) with a 24V DC motor (nominal voltage 27.2V) for continuous operation

Service life: The permanently lubricated, ball-bearing brush motor is designed for approx. 3,000 hours of operation

Features: Not self-priming, requires flooded suction; the pump is not suitable for dry running
Suitable liquids: fresh water or water-glycol mixture with up to 60% glycol content; temperature range: -30°C to +100°C
Ambient temperature: -30°C to +70°C
Maximum system pressure: 4.0 bar
Attachment: bracket for flat surfaces included in delivery
Connection: for hoses with an inner diameter of Ø38 mm (1-1/2")
Power consumption: 4.4A; fuse 6A
Dimensions: height 15.0 cm, width 12 cm, length 25.3 cm; weight: 3,00 kg

Net price: € 293,70

Weight: 3,5 kg
Delivery time 2 - 5 working days after receipt of payment

Circulation pump with 12V DC brush motor (nominal voltage 13,6V), equipped with a 20mm hose connection and a maximum flow rate of up to 65 liters per minute.

Ideal for circulating water and antifreeze in heating systems of cars, boats, mobile homes and similar applications, as well as for circulating fresh water in vehicles.

Flow rate: 65 liters per minute at 0.1 bar; 50 liters per minute at 0.25 bar
Shaft seal: mechanical seal
Protection class: Water and dust protected (IP67) with a 12V DC motor (nominal voltage 13,6V) for continuous operation

Service life: The permanently lubricated, ball-bearing brush motor is designed for approx. 3,000 hours of operation

Features: Not self-priming, requires flooded suction; the pump is not suitable for dry running
Suitable liquids: fresh water or water-glycol mixture with up to 60% glycol content; temperature range: -30°C to +100°C
Ambient temperature: -30°C to +70°C
Maximum system pressure: 4.0 bar
Attachment: bracket for flat surfaces included in delivery
Connection: for hoses with an inner diameter of Ø38 mm (1-1/2")
Power consumption: 4.4A; fuse 6A
Dimensions: height 14,1 cm, width 12 cm, length 25,5 cm; weight: 3,00 kg

Net price: € 293,70

Weight: 3,5 kg
Delivery time 2 - 5 working days after receipt of payment

The vacuum switch ensures that your pump switches off automatically to protect it from damage. It is ideal for all self-priming impeller pumps, such as bilge or tank emptying pumps, as it prevents the pump from running dry.

The switch disconnects the pump from the power supply as soon as the bilge or tank is empty. To start the pump again, you can simply press the pressure switch or the lever on the vacuum switch

Net price: €40.76

Weight: 1.00 kg
Delivery time 2 - 5 working days after receipt of payment

This pump is perfect for circulating water or antifreeze in heating systems of trains, buses, boats and other vehicles. It is also ideal for use in vehicle fresh water and coolant systems. With a flow rate of 115 liters per minute at 0.1 bar and 90 liters per minute at 0.25 bar, the pump offers powerful performance.

Thanks to the robust, magnetically driven and sealless design, it is absolutely leak-proof. The water and dust-proof 12V DC motor (nominal voltage 13.6V) is designed for continuous operation and has integrated protection against thermal overload. The brushless motor with ball bearings is permanently lubricated and ensures an operating time of up to 20,000 hours, even under demanding conditions.

With high torque, the pump ensures safe starts, even under difficult circumstances. However, it is not self-priming and requires a flooded suction. The pump is able to withstand dry running for up to 30 minutes. It can pump fresh water or a water-glycol mixture with up to 60% glycol, with the temperature range of the liquid being between -40°C and +100°C.

The ambient temperature may be between -40°C and +70°C. The system pressure can vary between 0.2 and 2.5 bar at 100°C. A separate universal bracket for flat surfaces is included for mounting. The pump is designed for hoses with an inner diameter of Ø38 mm (1-1/2")

Net price: € 776,05

Weight: 4,5 kg
Delivery time 2 - 5 working days after receipt of payment

This pump is perfect for circulating water or antifreeze in heating systems of trains, buses, boats and other vehicles. It is also ideal for use in vehicle fresh water and coolant systems. With a flow rate of 115 liters per minute at 0.1 bar and 90 liters per minute at 0.25 bar, the pump offers powerful performance.

Thanks to the robust, magnetically driven and sealless design, it is absolutely leak-proof. The water and dust-proof 24V DC motor (nominal voltage 27,2V) is designed for continuous operation and has integrated protection against thermal overload. The brushless motor with ball bearings is permanently lubricated and ensures an operating time of up to 20,000 hours, even under demanding conditions.

With high torque, the pump ensures safe starts, even under difficult circumstances. However, it is not self-priming and requires a flooded suction. The pump is able to withstand dry running for up to 30 minutes. It can pump fresh water or a water-glycol mixture with up to 60% glycol, with the temperature range of the liquid being between -40°C and +100°C.

The ambient temperature may be between -40°C and +70°C. The system pressure can vary between 0.2 and 2.5 bar at 100°C. A separate universal bracket for flat surfaces is included for mounting. The pump is designed for hoses with an inner diameter of Ø38 mm (1-1/2")

Net price: € 794,54

Weight: 4,5 kg
Delivery time 2 - 5 working days after receipt of payment

Construction. The delivery includes a check valve and a 90° and a straight connector (each 19 mm, 3/4"). The flow rate at 13.6V without back pressure is 38 l/min (600 GPH) and at a discharge head of 1 m (3 ft) 32 l/min (500 GPH), with the maximum discharge head reaching 2.5 m. The current consumption is 2.5A, protected by a 5A fuse. Dimensions: height 10.5 cm, width 8.2 cm, length 14.2 cm.

Net price: € 80,66

Weight: 1,00kg
Delivery time 2 - 5 working days after receipt of payment

Perfectly suited as a deck washing pump, fire extinguishing pump, refueling pump for diesel and oil, or bilge pump.
The motor is designed for a long service life and can withstand even heavy loads thanks to its additional protection against thermal overload.
In continuous operation, a maximum performance of 1 bar over 1 hour is possible.
Up to 4m self-priming under ideal conditions. The maximum delivery height of 7m should not be exceeded.
55L/min flow rate with free spout. 49L/Min at 3m delivery height.
Oil-resistant nitrile impeller with 1/1 eccentric and wear disk, pump head made of bronze, 3/4" Connector

Not included in delivery 3/4" BSP internal thread for corresponding connection

Net price: € 773,53

Weight: 9.00kg
Delivery time 2 - 5 working days after receipt of payment

High performance bilge pump for demanding applications

Equipped with a liquid-cooled 16-pole motor and durable double ball bearings, this pump is designed for extreme conditions. It comes with a check valve and straight threaded connectors in sizes 32 mm (1-1/4") and 28 mm (1-1/8"). The pump offers a flow rate of 130 l/min (2200 GPH) at 13.6V without back pressure and 120 l/min (1900 GPH) at a discharge head of 1 m (3 ft), with a maximum discharge head of 5 m. The current consumption is 7.5A, protected by a 12A fuse. Dimensions: height 17.7 cm, maximum diameter 10.8 cm

Net price: € 126,44

Weight: 2,80kg
Delivery time 2 - 5 working days after receipt of payment

Heavy-duty bilge pump for demanding applications

This submersible pump is designed for intensive use and features a liquid-cooled 12-pole motor with double ball bearings and mechanical seal for maximum durability. The delivery includes a check valve and hose connections in sizes 38 mm (1-1/2") and 51 mm (2"). The pump achieves a flow rate of 252 l/min (4000 GPH) at 13.6V without back pressure and 164 l/min (2600 GPH) at a discharge head of 1 m (3 ft), with a maximum discharge head of 7.6 m. The power consumption is 19.5A, protected by a 25A fuse. Dimensions: height 21.6 cm, maximum diameter 12.1 cm.

Net price: € 215,04

Weight: 3,80kg
Delivery time 2 - 5 working days after receipt of payment

Heavy-duty bilge pump for demanding applications

This submersible pump is designed for intensive use and features a liquid-cooled 12-pole motor with double ball bearings and mechanical seal for maximum durability. The delivery includes a check valve and hose connections in sizes 38 mm (1-1/2") and 51 mm (2"). The pump achieves a flow rate of 252 l/min (4000 GPH) at 13.6V without back pressure and 164 l/min (2600 GPH) at a discharge head of 1 m (3 ft), with a maximum discharge head of 7.6 m. The power consumption is 19.5A, protected by a 25A fuse. Dimensions: height 21.6 cm, maximum diameter 12.1 cm.

Net price: € 218,48

Weight: 3,80kg
Delivery time 2 - 5 working days after receipt of payment

High performance bilge pump for demanding applications

Equipped with a liquid-cooled 16-pole motor and durable double ball bearings, this pump is designed for extreme conditions. It comes with a check valve and straight threaded connectors in sizes 32 mm (1-1/4") and 28 mm (1-1/8"). The pump offers a flow rate of 130 l/min (2200 GPH) at 13.6V without back pressure and 120 l/min (1900 GPH) at a discharge head of 1 m (3 ft), with a maximum discharge head of 5 m. The current consumption is 7.5A, protected by a 12A fuse. Dimensions: height 17.7 cm, maximum diameter 10.8 cm

Net price: € 130,67

Weight: 2,80kg
Delivery time 2 - 5 working days after receipt of payment

Heavy-duty bilge pump for demanding applications

This powerful submersible pump is equipped with a liquid-cooled 12-pole motor and robust double ball bearings, making it ideal for heavy-duty use. The scope of delivery includes a check valve and straight threaded connectors in sizes 32 mm (1-1/4") and 28 mm (1-1/8"). With an operating voltage of 27.2V, the pump delivers up to 100 l/min (1600 GPH) without back pressure and achieves an output of 98 l/min (1550 GPH) at a discharge head of 1 m (3 ft). The maximum discharge head is 5 m. The current consumption is 3.5A, protected by a 6A fuse. Dimensions: height 14.9 cm, maximum diameter 10.8 cm

Net price: € 96,64

Weight: 2,00 kg
Delivery time 2 - 5 working days after receipt of payment

Heavy-duty bilge pump for demanding applications

This powerful submersible pump is equipped with a liquid-cooled 12-pole motor and robust double ball bearings, making it ideal for heavy-duty use. The scope of delivery includes a check valve and straight threaded connectors in sizes 32 mm (1-1/4") and 28 mm (1-1/8"). With an operating voltage of 27.2V, the pump delivers up to 100 l/min (1600 GPH) without back pressure and achieves an output of 98 l/min (1550 GPH) at a discharge head of 1 m (3 ft). The maximum discharge head is 5 m. The current consumption is 3.5A, protected by a 6A fuse. Dimensions: height 14.9 cm, maximum diameter 10.8 cm

Net price: € 92,44
Weight: 2,00 kg
Delivery time 2 - 5 working days after receipt of payment

Digitally controlled bilge pump with submersible function

This pump is equipped with the patented Ultima "Field Effect" sensor and comes in a mercury-free design. The delivery includes a check valve and straight threaded connectors in sizes 32 mm (1-1/4") and 28 mm (1-1/8"). The pump achieves a flow rate of 79 l/min (1250 GPH) at 13.6V without back pressure and 51 l/min (800 GPH) at a discharge head of 1 m (3 ft). The maximum discharge head is 2.6 m. The current consumption is 3A, protected by a 5A fuse. Dimensions: height 10.5 cm, width 8.2 cm, length 14.2 cm.

Net price: € 118,91

Weight: 1,10kg
Delivery time 2 - 5 working days after receipt of payment

This submersible pump from the Cartridge series offers a particularly easy-to-maintain motor that can be removed for maintenance or replacement without tools. The delivery includes a check valve as well as a 90° connector and a straight connector, both in size 19 mm (3/4"). The pump achieves a flow rate of 63 l/min (1000 GPH) at 13.6V without back pressure and 50 l/min (800 GPH) at a discharge head of 1 m (3 ft). The current consumption is 3.2A, protected by a 5A fuse. Dimensions: height 11.0 cm, width 7.0 cm

Net price: € 46,64

Weight: 0,70 kg
Delivery time 2 - 5 working days after receipt of payment

This pump from the cartridge series is characterized by its tool-free motor, which can be easily removed for maintenance or replacement. A check valve and a 90° connector and a straight connector in size 19 mm (3/4") are included in the delivery. At a voltage of 13.6V, the pump delivers a flow rate of 50 l/min (800 GPH) without back pressure and reaches 44 l/min (700 GPH) at a discharge head of 1 m (3 ft). The current consumption is 3.0A, protected by a 5A fuse. Dimensions: height 11.0 cm, width 7.0 cm

Net price: € 35,71

Weight: 0,70 kg
Delivery time 2 - 5 working days after receipt of payment

Construction. The delivery includes a check valve and a 90° and a straight connector (each 19 mm, 3/4"). The flow rate at 13.6V without back pressure is 51 l/min (800 GPH) and at a discharge head of 1 m (3 ft) 38 l/min (600 GPH), with the maximum discharge head reaching 2.6 m. The current consumption is 3A, protected by a 5A fuse. Dimensions: height 10.5 cm, width 8.2 cm, length 14.2 cm.

Net price: € 96,63

Weight: 1,00kg
Delivery time 2 - 5 working days after receipt of payment