Perfectly suited as a deck washing pump, fire extinguishing pump, refueling pump for diesel and oil, or bilge pump.
The motor is designed for a long service life and can withstand even heavy loads thanks to its additional protection against thermal overload.
Up to max. 06 bar counter pressure suitable for continuous operation.
Up to 4m self-priming under ideal conditions. The maximum delivery height of 6m should not be exceeded.
48L/min flow rate with free spout. 41L/Min at 3m delivery height.
Oil-resistant nitrile impeller with 1/1 eccentric and wear disk, pump head made of bronze.

Net price: €335,29

Weight: 3.50kg
Delivery time 2 - 5 working days after receipt of payment

Perfectly suited as a deck wash pump, refueling pump for diesel and oil or bilge pump.
The motor is designed for a long service life and can withstand even the heaviest loads.
Suitable for continuous operation up to a maximum of 06 bar back pressure
Self-priming up to 3m under ideal conditions. The maximum discharge head of 6m should not be exceeded.
21L/min discharge rate with free discharge. 19L/min at 3m discharge head.
Oil-resistant nitrile impeller with 1/1 eccentric and wear disk, pump head made of bronze. Lip seal. R3/8" connection

Net price: €184,87

Weight: 2.40kg
Delivery time 2 - 5 working days after receipt of payment

Perfectly suited as a deck washing pump, fire extinguishing pump, refueling pump for diesel and oil, or bilge pump.
The motor is designed for a long service life and can withstand even heavy loads thanks to its additional protection against thermal overload.
In continuous operation, a maximum performance of 1 bar over 1 hour is possible.
Up to 4m self-priming under ideal conditions. The maximum delivery height of 7m should not be exceeded.
55L/min flow rate with free spout. 49L/Min at 3m delivery height.
Oil-resistant nitrile impeller with 1/1 eccentric and wear disk, pump head made of bronze, 3/4" Connector

Not included in delivery 3/4" BSP internal thread for corresponding connection

Net price: € 773,53

Weight: 9.00kg
Delivery time 2 - 5 working days after receipt of payment

Flexible impeller pump with 24V DC motor. Self-priming with a flow rate of up to 15 liters/minute.
Suitable for continuous operation with a back pressure of up to 0.6 bar.
Maximum delivery head 6m and self-priming up to 3m.

Net price: € 167,23

Weight: 2.00kg
Delivery time 2 - 5 working days after receipt of payment

Flexible impeller pump with 12V DC motor. Self-priming with a flow rate of up to 15 liters/minute.
Suitable for continuous operation with a back pressure of up to 0.6 bar.
Maximum delivery head 6m and self-priming up to 3m.

Net price: € 167,23

Weight: 2.00kg
Delivery time 2 - 5 working days after receipt of payment

Perfectly suited as a deck wash pump, refueling pump for diesel and oil or bilge pump.
The motor is designed for a long service life and can withstand even the heaviest loads.
Suitable for continuous operation up to a maximum of 06 bar back pressure
Self-priming up to 3m under ideal conditions. The maximum discharge head of 6m should not be exceeded.
21L/min discharge rate with free discharge. 19L/min at 3m discharge head.
Oil-resistant nitrile impeller with 1/1 eccentric and wear disk, pump head made of bronze. Lip seal. R3/8" connection

Net price: €184,87

Weight: 2.40kg
Delivery time 2 - 5 working days after receipt of payment

The vacuum switch ensures that your pump switches off automatically to protect it from damage. It is ideal for all self-priming impeller pumps, such as bilge or tank emptying pumps, as it prevents the pump from running dry.

The switch disconnects the pump from the power supply as soon as the bilge or tank is empty. To start the pump again, you can simply press the pressure switch or the lever on the vacuum switch

Net price: €40.76

Weight: 1.00 kg
Delivery time 2 - 5 working days after receipt of payment

Perfectly suited as a deck washing pump, fire extinguishing pump, refueling pump for diesel and oil, or bilge pump.
The motor is designed for a long service life and can withstand even heavy loads thanks to its additional protection against thermal overload.
In continuous operation, a maximum performance of 1 bar over 1 hour is possible.
Up to 4m self-priming under ideal conditions. The maximum delivery height of 7m should not be exceeded.
55L/min flow rate with free spout. 49L/Min at 3m delivery height.
Oil-resistant nitrile impeller with 1/1 eccentric and wear disk, pump head made of bronze, 3/4" Connector

Not included in delivery 3/4" BSP internal thread for corresponding connection

Net price: € 773,53

Weight: 9.00kg
Delivery time 2 - 5 working days after receipt of payment

This powerful pump is ideal for quickly filling or emptying ballast tanks and is suitable for both fresh and sea water. Its reversibility allows it to pump in either direction; a corresponding reversing switch kit (part no. 09-47196) is available as an optional accessory.

The motor has been designed for long life and heavy-duty use and has built-in protection against thermal overload. The pump is suitable for continuous operation up to a maximum back pressure of 0.6 bar. It is self-priming up to a height of 4 metres under optimum conditions; however, the maximum discharge head should not exceed 6 metres.

With a discharge capacity of up to 54 litres per minute with free discharge and around 49 litres per minute with a discharge head of 3 metres, this pump is very efficient. It has a robust brass pump head and an MC97/EPDM impeller. If there is a risk of dry running for more than 30 seconds, the use of a polyurethane impeller (orange, part no. 09-824P-2) is recommended.

The shaft seal consists of a lip seal. The connections are designed for a hose with an inner diameter of 25 mm (1") directly on the inlet and outlet nozzles or can be used for corresponding fittings (not included) via an R1/2" internal thread.

The maximum current consumption is 12A, protected by a 15A fuse. The pump has compact dimensions: height 9.0 cm, width 12 cm, length 20.8 cm.

Net price: € 282,27

Weight: 3.50kg
Delivery time 2 - 5 working days after receipt of payment

Perfectly suited as a deck washing pump, fire extinguishing pump, refueling pump for diesel and oil, or bilge pump.
The motor is designed for a long service life and can withstand even heavy loads thanks to its additional protection against thermal overload.
Up to max. 06 bar counter pressure suitable for continuous operation.
Up to 4m self-priming under ideal conditions. The maximum delivery height of 6m should not be exceeded.
48L/min flow rate with free spout. 41L/Min at 3m delivery height.
Oil-resistant nitrile impeller with 1/1 eccentric and wear disk, pump head made of bronze.

Net price: € 285,71

Weight: 3.50kg
Delivery time 2 - 5 working days after receipt of payment

The kit includes pressure switch, check valve and spray nozzle and converts the F4B-19 into a deck wash pump.

Net price: € 151,25

Weight: 1,10kg
Delivery time 2 - 5 working days after receipt of payment

Contents: Cover gasket, impeller, mechanical seal, bracket/disc, 2x cover screws, lubricant.

Net price: € 73,53

Weight: 0,4 kg
Delivery time 2 - 5 working days after receipt of payment

This versatile pump is ideal for various applications such as bilge pumps, deck wash pumps, fire pumps, circulation pumps and oil and diesel refueling. Its powerful motor is designed for a long service life, even under intensive use, and has integrated protection against thermal overload.

The pump is suitable for continuous operation up to a maximum back pressure of 0.6 bar. It can operate self-priming up to a height of 3 meters under optimal conditions, although the maximum discharge head should not exceed 6 meters.

With a discharge capacity of up to 35 liters per minute with free discharge and around 31 liters per minute with a discharge head of 3 meters, this pump offers high efficiency. The robust brass pump head and the oil-resistant nitrile impeller ensure reliable performance.

The shaft seal is a lip seal. The connections are designed for a hose with an inner diameter of 25 mm (1") directly on the inlet and outlet nozzles or can be used via an R1/2" internal thread for corresponding fittings (not included).

The pump has a current consumption of 7.1A and is protected by a 10A fuse. The compact dimensions are: height 9.0 cm, width 12 cm, length 17.5 cm.

Net price: € 231,51

Weight: 2,70 kg
Delivery time 2 - 5 working days after receipt of payment

Set for changing the oil for the F2P10-19 with 1/2" hose connection and F3B-19 with 3/4" BSP thread.
The set is complete with couplings, dipstick and 6.8 mm extraction pipe.
Total hose length: 240 cm (120 and 120 cm)

Net price: € 42,01

Weight: 0,50 kg
Delivery time 2 - 5 working days after receipt of payment