The Cylone Low Pressure Centrifugal Pump, 50840-2012 from Jabsco has a flow rate of up to 110 LPM and very low back pressure.

The centrifugal pump is for continuous operation and ideal for ballast pump systems, hot water circulation for engine cooling or in central heating. Connections for BSP internal thread fittings with 3/4"

Net-Price: 342,54 €

Delivery time 2 - 5 working days after receipt of payment
Shipping weight 3.7 kg

MOTEX Gasket Set for Wartsila 120 054

Original Ref. No.: 120 054

Net Price: 25,50 €

The Cylone Low Pressure Centrifugal Pump, 50840-2024 from Jabsco has a flow rate of up to 110 LPM and very low back pressure.

The centrifugal pump is for continuous operation and ideal for ballast pump systems, hot water circulation for engine cooling or in central heating. Connections for BSP internal thread fittings with 3/4"

Net-Price: 380,60 €

Delivery time 2 - 5 working days after receipt of payment
Shipping weight 3.7 kg

The Jabsco magnetic circulation pump, 59520-0000B, has a delivery rate of up to 21 liters per minute at 0.1 bar counter pressure. Suitable for hot water circulation up to 80 degrees.

Suitable for continuous operation with 8-24 V

Net-Price: 314,84 €

Delivery time 2 - 5 working days after receipt of payment
Shipping weight 1.00 kg

Perfectly suited as a deck washing pump, fire extinguishing pump, refueling pump for diesel and oil, or bilge pump.
The motor is designed for a long service life and can withstand even heavy loads thanks to its additional protection against thermal overload.
Up to max. 06 bar counter pressure suitable for continuous operation.
Up to 4m self-priming under ideal conditions. The maximum delivery height of 6m should not be exceeded.
48L/min flow rate with free spout. 41L/Min at 3m delivery height.
Oil-resistant nitrile impeller with 1/1 eccentric and wear disk, pump head made of bronze.

Net price: €335,29

Weight: 3.50kg
Delivery time 2 - 5 working days after receipt of payment

Perfectly suited as a deck wash pump, refueling pump for diesel and oil or bilge pump.
The motor is designed for a long service life and can withstand even the heaviest loads.
Suitable for continuous operation up to a maximum of 06 bar back pressure
Self-priming up to 3m under ideal conditions. The maximum discharge head of 6m should not be exceeded.
21L/min discharge rate with free discharge. 19L/min at 3m discharge head.
Oil-resistant nitrile impeller with 1/1 eccentric and wear disk, pump head made of bronze. Lip seal. R3/8" connection

Net price: €184,87

Weight: 2.40kg
Delivery time 2 - 5 working days after receipt of payment

Perfectly suited as a deck washing pump, fire extinguishing pump, refueling pump for diesel and oil, or bilge pump.
The motor is designed for a long service life and can withstand even heavy loads thanks to its additional protection against thermal overload.
In continuous operation, a maximum performance of 1 bar over 1 hour is possible.
Up to 4m self-priming under ideal conditions. The maximum delivery height of 7m should not be exceeded.
55L/min flow rate with free spout. 49L/Min at 3m delivery height.
Oil-resistant nitrile impeller with 1/1 eccentric and wear disk, pump head made of bronze, 3/4" Connector

Not included in delivery 3/4" BSP internal thread for corresponding connection

Net price: € 773,53

Weight: 9.00kg
Delivery time 2 - 5 working days after receipt of payment

Flexible impeller pump with 24V DC motor. Self-priming with a flow rate of up to 15 liters/minute.
Suitable for continuous operation with a back pressure of up to 0.6 bar.
Maximum delivery head 6m and self-priming up to 3m.

Net price: € 167,23

Weight: 2.00kg
Delivery time 2 - 5 working days after receipt of payment

Flexible impeller pump with 12V DC motor. Self-priming with a flow rate of up to 15 liters/minute.
Suitable for continuous operation with a back pressure of up to 0.6 bar.
Maximum delivery head 6m and self-priming up to 3m.

Net price: € 167,23

Weight: 2.00kg
Delivery time 2 - 5 working days after receipt of payment

Perfectly suited as a deck wash pump, refueling pump for diesel and oil or bilge pump.
The motor is designed for a long service life and can withstand even the heaviest loads.
Suitable for continuous operation up to a maximum of 06 bar back pressure
Self-priming up to 3m under ideal conditions. The maximum discharge head of 6m should not be exceeded.
21L/min discharge rate with free discharge. 19L/min at 3m discharge head.
Oil-resistant nitrile impeller with 1/1 eccentric and wear disk, pump head made of bronze. Lip seal. R3/8" connection

Net price: €184,87

Weight: 2.40kg
Delivery time 2 - 5 working days after receipt of payment

Matador number 0770 0002

Loosens defective screws without threading tools.

Net Price: 14,00 €

Delivery time approx. 2 - 5 working days after receipt of payment

Cooling water pump, self-priming in size 200
200 L/min nominal flow rate at 1,500 rpm
Body housing made of bronze with foot mounting
Shaft drive with key 25 / 28.3 mm, spring 8.1 mm thick
Neoprene impeller included
38 mm (1-1/2") BSP internal thread connection

Net-Price: 655,08 €

Delivery time 2 - 5 working days after receipt of payment
Shipping weight 6.5 kg

Bronze impeller pump from Jabsco 22860-2003. Pump head with flange adapter.

Net-Price: 434,71€

Delivery time 2 - 5 working days after receipt of payment
Shipping weight 2.1 kg

Flexible impeller pump in size 010, self-priming up to 1.5m and a flow rate of 12 liters / minute. The pump body is made of stainless steel (AISI 316) for flange mounting.
Suitable for electric motors with a 1mm shaft 63 B14 (75mm bolt circle, 90mm flange, 6mm holes)
Compatible with the Jabsco 53010 series.
Neoprene impeller included
15mm (1/2") BSP external thread as connection

Net-Price: 927,10 €

Delivery time 2 - 5 working days after receipt of payment
Shipping weight 2.0 kg

Flexible impeller pump in size 010, self-priming up to 1.5m and a flow rate of 12 liters / minute. The pump body is made of stainless steel (AISI 316) for flange mounting.
Suitable for electric motors with a 1mm shaft 63 B14 (75mm bolt circle, 90mm flange, 6mm holes)
Compatible with the Jabsco 53010 series.
Neoprene impeller included
15mm (1/2") BSP external thread as connection

Net-Price: 831,81 €

Delivery time 2 - 5 working days after receipt of payment
Shipping weight 2.0 kg

Net-Price: 831,81 €

Delivery time 2 - 5 working days after receipt of payment
Shipping weight 7,1 kg

Cooling water pump size 40, self-priming.
40 L/min nominal flow rate at 1,500 revolutions
Pump body made of bronze with foot mounting
Includes neoprene impeller
Drive via single flattened shaft (12.7mm / 12mm)
19mm (3/4") BSP internal thread connection

Net-Price: 486,20 €

Delivery time 2 - 5 working days after receipt of payment
Shipping weight 2,9 kg

Often used as a foam pump on fire fighting
Bilge and circulation pump suitable for continuous operation for professional use.
2.4m self-priming
47 L/Min, up to 3m delivery height 44 liters/minute
Oil-resistant nitrile impeller with bronze pump head
25mm (1") connection, hose inner diameter directly to inlet and outlet ports or 13mm (1/2") BSP external thread (not included and must be ordered separately)
11A current consumption, over 15A fuse
hxwxl 9x12x22 cm

Net-Price: 556,24 €

Weight 4,3 kg
Delivery time approx. 2 - 5 working days after receipt of payment

Cooling water pump, size 20, self-priming
Nominal delivery rate of 20L/min at 1,500 revolutions per minute
Shaft sealed bronze pump body for foot mounting
Flattened shaft drive (12mm/11mm) via drive pulley or directly
Alternative to series 52020
Includes neoprene impeller

Net price € 234,45

Weight 1.10kg
Delivery within 2 - 5 working days after receipt of payment

Pressure water pump 12V with a flow rate of up to 11 liters/minute and a cut-off pressure of 2.8 bar.

With free discharge, the pump has a flow rate of up to 11 L/min (3GPM). The pressure switch switches on at approx. 1.4 bar (20 psi) and off at approx. 2.8 bar (40 psi). EPDM valves Sontopren 3 chamber membrane.
Suitable for drinking water systems with 2-3 taps. The pump can run dry without damage.

Scope of delivery: 1x 40 MESH mini filter. 2x 13mm (1/2" straight hose connection.

Alternative to: 31395-4012-3A, 31395-0392, 31395-8000, Flojet R4405143A

Net price: €88.29

Delivery time 2 - 5 working days after receipt of payment
Shipping weight 2.8 kg