Bilge pump L550 + Ultima Switch

The pump has a flow rate without back pressure of 50l/min (800 GPH) at 13.6 V. At a delivery head of 1m (ft), up to 44l/min (700 GPH) is possible. The pump has a current consumption of 3.0A and is protected with 5A.
Height 11.2cm / base area 10.0x7.5 cm

Scope of delivery: 1x 90° and 1x straight connector 19mm (3/4") and 1x check valve.

Net price: € 86,13

Weight: 0,80 kg
Delivery time 2 - 5 working days after receipt of payment

Construction. The delivery includes a check valve and a 90° and a straight connector (each 19 mm, 3/4"). The flow rate at 13.6V without back pressure is 64 l/min (1000 GPH) and at a discharge head of 1 m (3 ft) 44 l/min (700 GPH), with the maximum discharge head reaching 3.5 m. The current consumption is 3.2A, protected by a 5A fuse. Dimensions: height 10.5 cm, width 8.2 cm, length 14.2 cm.

Net price: € 108,39

Weight: 1,00kg
Delivery time 2 - 5 working days after receipt of payment

Cartridge series submersible pump.

The motor can be removed from the pump for replacement or maintenance purposes without tools.

The delivery includes a straight 19mm (3/4") and a 90° connector. The delivery rate is 50l/min (800GPH) without back pressure at 13.6V and 44l/min (700GPH) at a delivery head of 1m (3ft).
The pump is protected with 5A with a current consumption of 3A
Dimensions: 14.6x8.1x7.2 cm

Net price: € 42,01

Weight: 0,60kg
Delivery time 2 - 5 working days after receipt of payment

Automatic switch for fully automatic operation of your pump by simply attaching it with the clip to the "T-gap". The switch can be operated with 6V, 12V, 24V pumps up to 180W.

Net price: €32.76

Weight: 0,25kg
Delivery time 2 - 5 working days after receipt of payment

Electronic float switch

Activates the pump at a water level of 5.1cm (2") and switches it off at 1.9 cm (3/4")

Net price: € 50,41

Weight: 0,40 kg
Delivery time 2 - 5 working days after receipt of payment

The ULTIMA switch activates at a liquid level of 50mm (2") and automatically shuts off at a liquid level of 20mm (¾"). A 3 second delay prevents false starts.

The ULTIMA switch's innovative digital technology uses patented Mirus field effect detector cells that generate micro-electric fields to accurately detect water ingress and liquid leaks. These detector cells are fully sealed so they never come into contact with water, do not corrode, and are not affected by oil or other contaminants. With no moving parts and hermetically sealed solid state electronics, field detectors, and no mercury or corrosion-prone exposed sensors, the ULTIMA switch is an environmentally friendly solution. The switch can control pumps up to 20A at 12 or 24V.

Net price: € 56,29

Weight: 0,25kg
Delivery time 2 - 5 working days after receipt of payment

100db flood alarm with LED warning light.
Test/operate/turn off via three-way rocker switch.
Corrosion-free construction and completely sealed.
Easy installation

Net price: € 107,14

Weight: 0,30 kg
Delivery time 2 - 5 working days after receipt of payment

The control console gives you complete control over your equipment. With a simple push of a button you can choose between automatic and manual operation of the bilge pump. The automatic mode works in conjunction with the AS888 automatic switch or the electronic float switch. The console has three switch positions, an integrated fuse holder and lighting. The matt black design ensures a sophisticated look. Fuses are included.

Net price: € 46,64

Weight: 0,20 kg
Delivery time 2 - 5 working days after receipt of payment

The control console gives you complete control over your equipment. With a simple push of a button you can choose between automatic and manual operation of the bilge pump. The automatic mode works in conjunction with the AS888 automatic switch or the electronic float switch. The console has three switch positions, an integrated fuse holder and lighting. The matt black design ensures a sophisticated look. Fuses are included.

Net price: € 50,41

Weight: 0,20 kg
Delivery time 2 - 5 working days after receipt of payment

Electronic float switch

Activates the pump at a water level of 5.1cm (2") and switches it off at 1.9 cm (3/4")

Net price: € 55,45

Weight: 0,40 kg
Delivery time 2 - 5 working days after receipt of payment

This innovative digital flood warning technology uses the patented Mirus field effect cell. The fully sealed liquid sensor never comes into contact with water, is corrosion resistant and is not affected by oil or other foreign matter. Bilge Alert detects water and sends a signal to the 100 dB loud warning device and to the switch, which is conveniently mounted on a console. The three-way rocker switch allows you to test, disable and enable the warning device.

Net price: € 94,54

Weight: 0,40 kg
Delivery time 2 - 5 working days after receipt of payment

This innovative digital flood warning technology uses the patented Mirus field effect cell. The fully sealed liquid sensor never comes into contact with water, is corrosion resistant and is not affected by oil or other foreign matter. Bilge Alert detects water and sends a signal to the 100 dB loud warning device and to the switch, which is conveniently mounted on a console. The three-way rocker switch allows you to test, disable and enable the warning device.

Net price: € 107,98

Weight: 0,40 kg
Delivery time 2 - 5 working days after receipt of payment

This powerful pump is ideal for quickly filling or emptying ballast tanks and is suitable for both fresh and sea water. Its reversibility allows it to pump in either direction; a corresponding reversing switch kit (part no. 09-47196) is available as an optional accessory.

The motor has been designed for long life and heavy-duty use and has built-in protection against thermal overload. The pump is suitable for continuous operation up to a maximum back pressure of 0.6 bar. It is self-priming up to a height of 4 metres under optimum conditions; however, the maximum discharge head should not exceed 6 metres.

With a discharge capacity of up to 54 litres per minute with free discharge and around 49 litres per minute with a discharge head of 3 metres, this pump is very efficient. It has a robust brass pump head and an MC97/EPDM impeller. If there is a risk of dry running for more than 30 seconds, the use of a polyurethane impeller (orange, part no. 09-824P-2) is recommended.

The shaft seal consists of a lip seal. The connections are designed for a hose with an inner diameter of 25 mm (1") directly on the inlet and outlet nozzles or can be used for corresponding fittings (not included) via an R1/2" internal thread.

The maximum current consumption is 12A, protected by a 15A fuse. The pump has compact dimensions: height 9.0 cm, width 12 cm, length 20.8 cm.

Net price: € 282,27

Weight: 3.50kg
Delivery time 2 - 5 working days after receipt of payment

Net price: € 62,47

Weight: 0,4 kg
Delivery time 2 - 5 working days after receipt of payment

Perfectly suited as a deck washing pump, fire extinguishing pump, refueling pump for diesel and oil, or bilge pump.
The motor is designed for a long service life and can withstand even heavy loads thanks to its additional protection against thermal overload.
Up to max. 06 bar counter pressure suitable for continuous operation.
Up to 4m self-priming under ideal conditions. The maximum delivery height of 6m should not be exceeded.
48L/min flow rate with free spout. 41L/Min at 3m delivery height.
Oil-resistant nitrile impeller with 1/1 eccentric and wear disk, pump head made of bronze.

Net price: € 285,71

Weight: 3.50kg
Delivery time 2 - 5 working days after receipt of payment

The kit includes pressure switch, check valve and spray nozzle and converts the F4B-19 into a deck wash pump.

Net price: € 151,25

Weight: 1,10kg
Delivery time 2 - 5 working days after receipt of payment

Contents: Cover gasket, impeller, mechanical seal, bracket/disc, 2x cover screws, lubricant.

Net price: € 73,53

Weight: 0,4 kg
Delivery time 2 - 5 working days after receipt of payment

This versatile pump is ideal for various applications such as bilge pumps, deck wash pumps, fire pumps, circulation pumps and oil and diesel refueling. Its powerful motor is designed for a long service life, even under intensive use, and has integrated protection against thermal overload.

The pump is suitable for continuous operation up to a maximum back pressure of 0.6 bar. It can operate self-priming up to a height of 3 meters under optimal conditions, although the maximum discharge head should not exceed 6 meters.

With a discharge capacity of up to 35 liters per minute with free discharge and around 31 liters per minute with a discharge head of 3 meters, this pump offers high efficiency. The robust brass pump head and the oil-resistant nitrile impeller ensure reliable performance.

The shaft seal is a lip seal. The connections are designed for a hose with an inner diameter of 25 mm (1") directly on the inlet and outlet nozzles or can be used via an R1/2" internal thread for corresponding fittings (not included).

The pump has a current consumption of 7.1A and is protected by a 10A fuse. The compact dimensions are: height 9.0 cm, width 12 cm, length 17.5 cm.

Net price: € 231,51

Weight: 2,70 kg
Delivery time 2 - 5 working days after receipt of payment

Set for changing the oil for the F2P10-19 with 1/2" hose connection and F3B-19 with 3/4" BSP thread.
The set is complete with couplings, dipstick and 6.8 mm extraction pipe.
Total hose length: 240 cm (120 and 120 cm)

Net price: € 42,01

Weight: 0,50 kg
Delivery time 2 - 5 working days after receipt of payment

- Maximum flow rate: 16 liters per minute (4.5 GPM)
- Self-priming up to a height of 3 meters
- Dry running and pumping of air-water mixtures possible
- Nitrile valves and membranes, oil-resistant
- Quiet operation
- Compact, low-maintenance design, requires no filter
- Includes KlickTite XL connections for 25 mm (1") and 19 mm (3/4") hoses (inner diameter)
- Maximum current consumption: 4A; fuse: 8A
- Dimensions: height 11.8 cm / 20.4 cm x width 23.5 cm / 18.1 cm x length 18.6 cm

The Viking Power 16 is an advanced, self-priming single-chamber diaphragm pump that is ideal for use in shower water drains, for disposing of waste water and for pumping out leakage water. Thanks to its compact design and versatile application options, it can be optimally adapted to the conditions of installation on a ship. It can be easily installed behind the drain in the sewage system or as a bilge pump in leisure boats. The integrated relief valves mean that no additional filters are required. The pump can run dry and pump air-water mixtures without any problems. The Viking Power 16 has a self-priming height of up to 3 meters. Its quiet operation is supported by the low impulse and the dampening rubber bracket. Specially developed for waste water operation, the Viking Power 16 is characterized by its long service life and easy maintenance.

Net price: € 165,54

Weight: 3.80kg
Delivery time 2 - 5 working days after receipt of payment